Air Hose Kit for 80D and 80DB Electric Air Pump
6ft reinforced air hose
Extra hose-to-Pump adapter
Extra Halkey-Roberts valve adapter
1). Higher pressure output causes air temperature increases fast. Higher temperature and slower air flow may damage the pump and air hose. Do NOT use the pump after it continued running for more than 5 minutes at the setting of 8 PSI or higher. Let the overheated pump cool down for at least 15 minutes before next use.
3). Make sure the pump’s internal battery (if applicable) or external battery is fully charged before operating the pump. Battery in low level will cause longer working time and damage to the pump’s internal parts.
4). To cool down the pump fast, let the pump operate a few minutes without connecting the hose to it.
The air flow may cool it down faster.
5). If the hose is damaged due to the hot air near the hose-to-pump connector, cut the damaged portion (Eg. approximate 2-inches) and use the new extra hose-to-pump connector.
6). We use some electric tape to wrap the air hose for about 2 inches long starting from the hose-to-pump connector side. You can also do the same thing to reinforce the hose after installing the new hose-to-pump adapter.