|Dimensions||6 × 5 × 6 in|
Product Key Features
Traditional Bimini Top sellers had no good solution for Inflatable Boats, they are either weak to support or hard to install. Seamax developed this special Bimini Pontoon Fitting Kit for all inflatable boats, Installation Dimensions 3”x5”.
The patch has the curve interface to attach on the pontoon; it is also built-in a strong stainless bracket to support the Bimini weight up to 100Lbs and 30 knots wind speed. Fitting can turn 180 degree wide angle, it has no limitation to install it at any position. Its design and quality had been recognized as the best solution by Zodiac dealers.
This package also comes with stainless steel hardware, including bolts, lock pins and wind nuts. You can choose different hardware for your Bimini top as temporary or permanent installation solution.
We have the PVC package and Hypalon package, 2 Part Glue 250ml is coming with the package. You may only need 50ml to get the job done, and the rest of glue can be kept for other boat service. Glue and hardener are both sealed in their aluminum bottles. If your boat is made by TPU (Polyurethane), please choice the PVC version.
Product had been tested for a few years from now. Now inflatable boat owner can have great solution for boat Bimini if purchase this kit.
Additional Product Information
MEK Based Glue instruction (for Pontoon Fitting Kit) – Package provides 2 Part Glue. Mix 5% hardener into the glue before use. Max mix 10% hardener when in Cold Weather 10C-15C or when High Humanity 50-75%.
We suggest using small painting blush to apply 2 layers glue in both surface, wait 5-10 minutes to dry and attach those layers together with pressure. Wait 48 hours before boating.
Store the Glue in cold place. Keep out of Reach of Children. Product has 2 years limited warranty.